Alpha Line

The massive aluminum baseplate accommodates all subwoofers for d&b series T, Y and V and can be attached through eight additional holes on substructures.

The adapter head contains also the d&b point source clamp.

The d&b point source clamp fits for loudspeakers as of the E8. The clamp is attached to the back of the loudspeakers and therefore barely visible for the audience. The d&b point source clamp is tiltable to a maximum of 80° in 2° steps. The loudspeakers can be mounted horizontal in an angle of 20° or 40°.

The d&b line source adapter head can carry a maximum load of 170 kg. The bottom element can be tilted positive or negative.

Attached to the d&b line source adapter head will be one of the mounting devices for the series T, Y or V.

The hinge element makes it easier to build up the d&b point source series as well as the line source series. The hinge element replaces the 80 cm extension.

The stand set contains the following components:
1 x Baseplate
1 x Hinge Element
1 x d&b point source adapter head
1 x d&b line source adapter head

Extensions:
2 x 100 cm
1 x 80 cm
1 x 60 cm